RT server configuration
This page contains notes on the setup of the MIT krb5 RT server. The current server is krbdev.mit.edu (canonical name kerborg-prod-app-1.mit.edu), which runs Ubuntu 20.04.
In Ubuntu 20.04, the request-tracker4 package contains a suitable version of RT. This package will ask some questions at installation time:
- RT site name: krbdev.mit.edu
- handle RT_SiteConfig.pm permissions: yes
- use dbconfig-common: no
The data in RT is stored in a PostgreSQL database. The postgresql Ubuntu package will install the recommended version of PostgreSQL for the current Ubuntu version.
The mail interface to RT is handled by Postfix, so the postfix package is required. The libsendmail-pmilter-perl package is required for the custom milter script.
The web front end to RT is an Apache2 web server, so the apache2 package is required. RT uses a FastCGI server, so the libapache2-mod-fcgid package is required.
The server host acts as an authoritative name server for the kerberos.org zone, so the bind9 package must be installed.
In sum, the following packages must be installed on the RT server:
apache2 bind9 libapache2-mod-fcgid libsendmail-pmilter-perl perl perl-base postfix postgresql request-tracker4
The postgresql package will create a postgres user account.
The following user accounts and group entries must be created manually:
- group rt
- user rtcvs: primary group rt, homedir /var/rt2, shell /bin/sh
- user rt: primary group rt, homedir /var/rt2, shell /bin/false
These accounts could be created with:
groupadd -r rt useradd -r -g rt -d /var/rt2 rtcvs useradd -r -m -g rt -d /var/rt2 -s /bin/false rt
Some of the above accounts may be created by ops during provisioning. /var/rt2 and /var/rt2/.ssh must be owned by rtcvs or sshd will reject logins as rtcvs from drugstore.
For the authoritative repository, create a group named "krbwrite" and an account for each committer, with a root-owned home directory and git-shell configuration:
groupadd krbwrite useradd -u 3622 -s /usr/bin/git-shell -G krbwrite ghudson mkdir /home/ghudson mkdir /home/ghudson/git-shell-commands ln -s /git/krb5.git/hooks/krb5-rt-id /home/ghudson/git-shell-commands
Create /var/rt2/bin and copy in the following scripts from the krbdev-services repository:
rt-scripts/rt-reserve-ticket rt-scripts/rtmilter.pl rt-scripts/krb5-daily.sh rt-cvs/rt-cvsgate
The scripts and directory should be mode 755 and owned by user rt and group rt.
/var/rt2 should contain an empty .k5login file, managed by ops. It should contain a .ssh/authorized_keys file, managed by ops, containing the krbsnap key from hooks/krbsnap_rsa_key.pub in the authoritative repository.
Create /var/psqlbackups (owned by root).
The rt user account is not actually needed for the current RT installation, and the homedir name /var/rt2 is outdated. The following references need to be taken into account when changing the user and group configuration:
- Both the rt and rtcvs accounts have the homedir /var/rt2.
- krb5-daily.sh references the krbsnap.keytab file and dumps directory in /var/rt2.
- A root cron job runs krb5-daily.sh from /var/rt2.
- A root cron job runs rtmilter on boot from /var/rt2.
- The empty /var/rt2/.k5login file is managed by ops.
- The /var/rt2/.ssh/authorized_keys file is managed by ops.
- The authoritative krb5 git repository rt-ssh-cmd config value references the rtcvs user and /var/rt2/bin/rt-cvsgate.
- The authoritative krb5 git repository hooks/krb5-rt-id script references the rtcvs user and /var/rt2/bin/rt-reserve-ticket. This script comes from the krbdev-services repository's githooks/krb5-rt-id.
- Some of the same references are present in the krbdev-services repository, but they aren't used.
Install the RT_SiteConfig.pm file from the krbdev-services repository in /etc/request-tracker4.
In root's crontab file ("crontab -e" as root), add the following to perform daily maintenance:
MAILTOemail@example.com 0 3 * * * /usr/sbin/rt-clean-sessions 0 4 * * * /var/rt2/bin/krb5-daily.sh
Many PostgreSQL files live in directories specific to the PostgreSQL major and minor version, such as /etc/postgresql/8.3 for PostgreSQL 8.3.
The Ubuntu postgresql package will create a "main" cluster with a configuration directory in /etc/postgresql/<version>/main.
In /etc/postgresql/<version>/main/pg_ident.conf, add:
local root root local root postgres local root rt_user local rt rt_user local rtcvs rt_user local postfix rt_user local nobody rt_user local www-data rt_user
(The entry for "rt" should no longer be needed, but is currently still present.)
In /etc/postgresql/<version>/main/pg_hba.conf, find the line that reads "local all all peer" and add "map=local" to the end, so it reads "local all all peer map=local". Comment out the line that reads "local all postgres peer", despite the warning not to disable it. Run "service postgresql restart" to reread the affected files. Run "psql -Upostgres --list" to verify that the identity map works.
Run "createuser -Upostgres rt_user" to create the rt_user role.
Run "/usr/sbin/rt-setup-database --action create" to create the database, then restore it from a backup with "zcat /path/to/dump.gz | psql -d rt4 -Upostgres"
By default ops manages Postfix with Puppet. This must be disabled by ops, and the Debian defaults restored by copying /usr/share/postfix/main.cf.debian to /etc/postfix/main.cf and /usr/share/postfix/master.cf.dist to /etc/postfix/master.cf.
At the end of /etc/postfix/main.cf add:
myhostname = krbdev.mit.edu mydestination = krbdev.mit.edu, kerborg-prod-app-1.mit.edu, localhost.mit.edu, localhost # Suppress some headers to avoid leaking internal addresses to spammers. prepend_delivered_header = enable_original_recipient = no # RT header milter smtpd_milters = unix:private/milter
Copy /etc/aliases from the old server. To avoid aiding spammers, its contents are not reproduced here. In particular, /etc/aliases contains an internal address corresponding to the membership of the krb5-bugs-incoming mailman list; revealing this address could allow spammers to bypass moderation of incoming bug reports.
In root's crontab file ("crontab -e" as root):
@reboot /var/rt2/bin/rtmilter.pl /var/spool/postfix/private/milter
Run the command by hand (backgrounded) to start the milter process before the next reboot.
Run "newaliases" and "postfix reload" to pick up the changed configuration.
Make sure firstname.lastname@example.org and email@example.com are authorized as non-member senders at https://mailman.mit.edu:444/mailman/admin/krb5-bugs/privacy/sender .
Apache httpd configuration
Create /etc/apache2/ssl.crt and /etc/apache2/ssl.key.
Copy /etc/apache2/ssl.key/server.key and /etc/apache2/ssl.crt/server.crt from the old server, or follow the instructions at http://kb.mit.edu/confluence/display/istcontrib/Obtaining+an+SSL+certificate+for+a+web+server to obtain a new one. server.key and server.crt may be symlinks using whatever scheme seems convenient for renewing certificates every few years.
Install /etc/apache2/ssl.crt/chain.crt from /mit/apache-ssl/certificates/InCommon-chain.crt.txt (requires tokens). Cutting and pasting is effective for transferring certificates as they are represented as short text files.
Install /etc/apache2/ssl.crt/clientCA.crt from /mit/apache-ssl/certificates/mitCAclient.pem (requires tokens).
Install the rt.conf file from the krbdev-services repository as /etc/apache2/sites-available/rt.conf .
Edit /etc/apache2/mods-available/proxy.conf and set:
ProxyPass /buildbot/ws ws://krbdev-buildbot.mit.edu:8010/ws ProxyPassReverse /buildbos/ws ws://krbdev-buildbot.mit.edu:8010/ws ProxyPass /buildbot/ http://krbdev-buildbot.mit.edu:8010/ ProxyPassReverse /buildbot/ http://krbdev-buildbot.mit.edu:8010/ <Proxy http://krbdev-buildbot.mit.edu:8010/*> Allow from all </Proxy>
Edit /etc/apache2/ports.conf and add "Listen 444" in the ssl_module section after "Listen 443".
Clean out /var/www and install index.html and robots.txt from the krbdev-www directory of the krbdev-services repository.
a2enmod ssl a2enmod userdir a2enmod rewrite a2enmod proxy_http a2enmod proxy_wstunnel a2dissite 000-default a2ensite rt service apache2 restart
Get a certificate for the new VM's real hostname and temporarily point /etc/apache2/ssl.crt/server.crt at it.
In /etc/request-tracker4/RT_SiteConfig.pm, temporarily set @ReferrerWhitelist to use the real hostname instead of krbdev.mit.edu.
Temporarily set emergency moderation on the krb5-bugs mailing list (at https://mailman.mit.edu:444/mailman/admin/krb5-bugs/general ) to ensure that mail sent to that list as the result of testing is caught in the moderation queue.
Verify that RT displays at https://realhostname/rt and tickets can be accessed. Verify that https://realhostname:444/ works and that a new ticket can be created. Respond to the ticket via email and verify that the response is stored in the ticket.
As root, run /var/rt2/bin/krb5-daily.sh and verify that a dump file appears in /var/psqlbackups.
As rtcvs ("su -s /bin/bash - rtcvs"), run /var/rt2/bin/rt-reserve-ticket and verify that a ticket number is printed.
To test rt-cvsgate, create a test message in /tmp/testmsg like so:
ticket: new id: NNNN (use the ticket number printed by rt-reserve-ticket above) subject: rt-cvsgate test tags: pullup
test commit message
As rtcvs, run "/var/rt2/bin/rt-cvsgate username < /tmp/testmsg", where username is an authorized user.
Undo the temporary changes and restore the database from a dump file.
The bind9 configuration files can be found in krbdev-services under bind. They should be installed under /etc/bind. "rndc reload" will restart the runing named with the changed configuration. If it is necessary to edit any of the zone files, be sure to update the serial number in the SOA record to the current date followed by "00" (or "01" etc. for successive edits in the same day).
If the IP address if kerberos.org needs to be changed, the glue record at hover.com must be updated. In the current Hover UI, glue records can be found under "advanced". The transfer lock on the domain must be temporarily disabled (via the Overview screen) to update glue records.