Difference between revisions of "Solaris Build Environment"

Revision as of 12:41, 15 November 2016

This page contains notes on the setup of a Solaris buildbot worker for MIT krb5.

Our current Solaris build hardware is a Sun Fire V240 running Solaris 10 U10.

Solaris 10 includes a variety of free software tools in /usr/sfw, but not the full set of dependencies needed to checkout, build, and test the krb5 tree. We have chosen to use the NetBSD pkgsrc collection to build these dependencies.

(The procedure described below does not currently work. We are still working through the issues, and might change our approach if we cannot make progress.)

Building a newer gcc

1. Set up a shell with a path containing the needed system utilities:

   /bin/bash
   export PATH=/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin

2. Create /usr/local/src:

   mkdir /usr/local/src
   cd /usr/local/src

3. From https://ftp.gnu.org/, fetch the latest versions of gmp, mpfr, and mpc, and fetch gcc 5.4.0. Untar them in /usr/local/src.

4. Build gmp, mpfr, and mcc as follows.

   cd /usr/local/src/gmp-version
   ./configure --disable-shared ABI=32
   gmake && gmake install
   cd /usr/local/src/mpfr-version
   ./configure --disable-shared LDFLAGS=-L/usr/local/lib
   gmake && gmake install
   cd /usr/local/src/mpc-version
   ./configure --disable-shared LDFLAGS=-L/usr/local/lib
   gmake && gmake install

5. Build gcc as follows. This build takes many hours.

   cd /usr/local/src/gcc-5.4.0
   edit gcc/config/sol2.h; where it says "#ifndef USE_GLD" and subsequently talks about using a mapfile, change it to:
       #if !defined(USE_GLD) && defined(ENABLE_SHARED_LIBGCC)
   ./configure --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local --disable-shared --enable-languages=c,c++
   gmake && gmake install

Setting up pkgsrc

If it becomes necessary to restart this process, "rm -rf /usr/pkgsrc /usr/pkg /var/db/pkg /var/db/pkg.refcount" will clean the slate.

1. Set up the shell and fetch the pkgsrc tar file:

   /bin/bash
   export PATH=/usr/pkg/sbin:/usr/pkg/bin:/usr/local/bin:/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
   cd /tmp
   wget https://ftp.netbsd.org/pub/pkgsrc/stable/pkgsrc.tar.gz
   cd /usr
   gtar xzf /tmp/pkgsrc.tar.gz

2. Bootstrap pkgsrc:

   cd /usr/pkgsrc/bootstrap
   CFLAGS='-O2 -Wno-implicit-function-declaration' CC=/usr/local/bin/gcc ./bootstrap
   pkg_admin -K /var/db/pkg fetch-pkg-vulnerabilities
   (cd /usr/pkgsrc/shells/bash && bmake install)
   edit /usr/pkg/etc/mk.conf, change TOOLS_PLATFORM.sh to /usr/pkg/bin/bash
   exit out of the shell, run /usr/pkg/bin/bash, and set the path as in step 1
   (cd /usr/pkgsrc/devel/scmcvs && bmake install)
   (cd /usr/pkgsrc && cvs update)

3. Build packages useful for krb5 development:

   (cd /usr/pkgsrc/devel/git && bmake install)

Creating user accounts

By default, /home on Solaris is controlled by the automounter. To avoid needing to change the automounter configuration, we create user accounts with home directories in /export/home:

   useradd -d /export/home/ghudson -m ghudson

Creating an account allows the Kerberos principal of the same name in the ATHENA.MIT.EDU realm to log in on that account.

Problem log

A number of problems were encountered when trying simpler or mistaken variants of the above procedure. For the sake of easier debugging, here is a record of them:

• It initially looked like cvs wasn't present in pkgsrc. The directory is named devel/scmcvs, because devel/cvs would conflict with the CVS metadata directory on case-insensitive filesystems.

• When attempting to build pkgsrc with /usr/sfw/bin/gcc, a circular dependency between pkgtools/digest and lang/gcc2 was encountered. This resulted from running bmake without /usr/sfw/bin in $PATH. After correcting the path, it was necessary to run "bmake clean" in pkgtools/digest to clear the issue.

• When attempting to build pgksrc with /usr/sfw/bin/gcc, devel/p5-gettext and other packages would fail when they included <stdbool.h>, because that Solaris header is incompatible with the default standards environment of gcc 3.4.3. This can be worked around by bootstrapping pkgsrc with "gcc -std=gnu99 -Wno-implicit declaration" and setting CC to that value in /usr/pkg/etc/mk.conf after bootstrap. (Without "-Wno-implicit-declaration", the bootstrap process fails when building bsdinstall.) Building with gcc 5.4.x works around the <stdbool.h> problem, as it defaults to the gnu11 standards environment, but it also requires -Wno-implicit-function-declaration for bsdinstall to build correctly during bootstrap.

• After removing /usr/pkgsrc and /usr/pkg, bootstrapping pkgsrc again wouldn't install anything in /usr/pkg except /usr/pkg/etc/mk.conf. To start over, it is necessary to also remove /var/db/pkg.

• When attempting to build pkgsrc with "/usr/sfw/bin/gcc -std=gnu99 -Wno-implicit-declaration", /bin/bash segmentation faults were encountered in several packages (starting with p5-Error) when executing long shell lines. To work around this issue, the above procedure builds the pkgsrc bash and uses it for the build after the bootstrap.

• When attempting to build pkgsrc with "/usr/sfw/bin/gcc -std=gnu99 -Wno-implicit-declaration", pkg_create for some packages failed with stat failures, where the offending pathnames contained gcc error messages such as "gcc: unrecognized option `-print-multiarch': No such file or directory". To work around this problem, we build a newer version of gcc in /usr/local/bin before building pkgsrc.

• When building gcc's dependencies, mpc complains that libgmp uses an incompatible ABI. This is because gmp overrides the default 32-bit ABI and chooses the 64-bit ABI for performance reasons. Configuring gmp with "ABI=32" works around the issue.

• gcc does not use the configured LDFLAGS when linking some of its programs; therefore, configuring with LDFLAGS=-L/usr/local/lib is not sufficient to find its dependencies there, and configuring with LDFLAGS=-R/usr/local/lib does not allow built programs to find the shared library. To work around this problem, we configure the dependencies with --disable-shared and configure gcc with --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local.

• If gcc is configured without --disable-shared, programs built with /usr/local/bin/gcc will not run wth the default runtime linker path. We could perhaps modify the runtime linker path to include /usr/local/lib, but we prefer solutions that require fewer global system configuration changes.

• If gcc is configured with --disable-shared, the build fails with "ld: fatal: file libgcc-unwind.map: stat failed: No such file or directory". (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65725). To work around this problem, we apply a small change to fix the bug, taken from the aforementioned bug report.

• If gcc is configured with --disable-shared, the build fails with "libtool: compile: not configured to build any kind of library" while building Java classpath materials. To work around this problem, we configure gcc with support for just C and C++.

• When building the bash pkgsrc package with gcc 5.4.0 from /usr/local/bin, the subsidiary build of devel/gettext-tools fails with "pkg_create: lstat failed for file # ### BEGIN LIBTOOL TAG CONFIG: disable-static: No such file or directory". The offending string appears in work/.PLIST. A workaround has not yet been found.