Difference between revisions of "Projects/Plugin support improvements (first version)"

Revision as of 10:13, 1 July 2010

This page contains some notes about improving the plugin infrastructure, but does not make a specific proposal yet.

Some possibly useful ideas at Dr Dobb's. It's rather biased toward C++, and we may disagree with some of the details.

Motivation

Have you tried to write a new plugin for Kerberos? What was your experience? Your answer to this question is the motivation for this project. We set up our goal on creating a framework that

• Facilitates simple and clear additions of new plugin interfaces and new implementations of the existing plugins;
• Handles both built-in and dynamic plugins;
• Allows multiple implementation of the same plugin interface;
• Provides uniform way to supply parameters for plugin configuration;

Definitions

pluggable interface

an (internal) interface that can be implemented by a third party. These can be one-to-one, or one-to-many. An example of one-to-one is the DAL, and an example of one-to-many is preauth.

module

a unit of code that implements a pluggable interface. It can be built in, or it can be dynamically loadable.

built-in

a module whose executable code is located within the library shared object or executable program file, or behaves as if it were. (Dependent library shared objects of the calling library can contain "built-in" modules for the calling library.) The distinguishing feature of a built-in module is that, as part of program startup, the operating system automatically maps the executable code of the module into the address space of the process that calls it, without any explicit action by the library or program.

dynamically loaded

a module whose executable code is located within a file that is distinct from the library or program that calls it. The plugin support framework uses the runtime linker (or equivalent) to explicitly map the executable code of the module into the process address space.

discovery

process of enumerating what modules are available for a pluggable interface. Includes possible filtering of the raw discovered set.

• compiled-in
• directory scan
• explicit inclusion by configuration
• explicit exclusion by configuration

loading

the process of making modules available for calling. This can involve dynamically loading a module using the runtime linker, or it can involve registering a vtable provided by an application.

• built-in
• dynamic loading
• application-registered

selection

the process of a caller invoking one specific module from the set of loaded modules that implement an interface.

Structure

Participants

• Plugin Manager (PM) - Abstract module that declares interface for operations that manage plugin configuration and registry services;
• Plugin Manager Implementation (PMI) - Implements the operations for plugin configuration and registry services;
• Plugin Loader (PL) - Abstract module that declares an interface for operations that create abstract plugin objects. It knows about:

Set of available implementations;

How to create them;

We might want to have a separate loader function for each pluggable interface, for type safety;

• Plugin Loader Implementation (PLI) - Concrete implementation of PL;
• Plugin Interface (PI) - Abstract module that declares plugin interface.
• Plugin Interface Implementation (PII) - Concrete implementation of the plugin interface;
• Caller - Plugin caller.

Collaboration

• An instance pl_manager of a particular PMI is created as part of krb5_init_context operation at run-time (1). This instance will use methods specific to PMI to configure and register the desired plugin implementations;
• The list of the desired plugin implementations is known to the specific PLI which is aggregated with PMI (2);
• PMI defers acquiring of plugin interfaces to PLI (3);
• The client uses pl_manager to invoke the desired plugin interface (4).

User Interface

plhandle plugin_manager_get_service (plugin_manager* instance,const char*, const int);

int plugin_manager_configure (plugin_manager* instance,const char*);

void plugin_manager_start (plugin_manager* instance);

void plugin_manager_stop (plugin_manager* instance);

void get_loader_content (loader_handle handle, const char* container[]);

plhandle create_api (loader_handle handle, const char* plugin_name);

Implementation

Proof of concept code is available from plugins branch

svn+ssh://svn.mit.edu/krb5/branches/plugins

k5-int.h

plugin_manager *pl_manager is added to _krb5_context

PMI vs PLI

In general a particular PMI is tied to one or more PLIs. In its turn, each PLI is responsible for loading one or more plugins. The notion of the multiple plugins per PLI is justified by the convenience of the plugin grouping based on their relativity.

Implementation must be MT safe

Consequences

The management details, such as configuration and loading, are hidden from the plugin writers and callers.

• The responsibility of the writer of the new plugin interface (PI) is limited to the writing source and header as described at Template_1:

Template 1

#include <plugin_manager.h>
#include <k5-int.h>
typedef struct {
               int version;
               krb5_error_code (*fn1)(krb5_context);
} plugin_PLName;
 
krb5_error_code plugin_PLName_fn1(plhandle handle, krb5_context)
{
   plugin_PLName* api = (plugin_PLName*) handle.api;
   api->plugin_PLName_fn1(context);
   return 0;
}

• The responsibility of the writer of the new plugin interface implementation (PII) is limited to the writing source and header as described at Template_2 and the notifying the plugin loader about its availability Template_3:

Template 2

static krb5_error_code
plugin_PLName_fn1(krb5_context ctx, krb5_data *data)
{ /*intended functionality */}

static void
plugin_PLName_cleanup(plugin_PLName* api) 
{ /* do some cleanup */ }

static krb5_error_code
plugin_PLName_init(void)
{ /* do some init */ } 

plhandle  plugin_PLName_PLImpl_create()
{
   plhandle handle;
   plugin_PLName* api = malloc(sizeof(plugin_prng));
   api->version = 0;
   api->fn1 = plugin_PLName_fn1;
   api->PLName_init = plugin_PLName_init;
   api->PLName_cleanup = plugin_PLName_cleanup;
   handle.api = api;
   return handle;
}

Template 3

static plugin_descr _table[] = {
   {"plugin_PLImpl_PLName", plugin_PLName_PLImpl_create},
};

For better readability some of the verification, clean-up, error handling code is omitted from the templates

Sample Code

Plugin initialization

The following is an example of the plugin initialization:

plugin_default_manager_get_instance(&plugin_mngr_instance);
plugin_manager_configure(ctx->pl_manager, conf_path);
plugin_manager_start(ctx->pl_manager);

How to call plugins

The following is an example of invoking Password Quality plugin:

plhandle plugin_handle;
plugin_handle = plugin_manager_get_service(ctx->pl_manager, "plugin_pwd_qlty", PWD_QLTY_KRB);
plugin_pwd_qlty_check(ctx->plugin_manager, srv_handle, password, use_policy, pol, principal);

How to construct plugin interface (PI)

The following is an example of plugin interface called "password quality":

typedef struct {
                int version;
                kadm5_ret_t (*pwd_qlty_init)(kadm5_server_handle_t);
                void (*pwd_qlty_cleanup)();
                kadm5_ret_t (*pwd_qlty_check)(kadm5_server_handle_t, char*,  int, kadm5_policy_ent_t, krb5_principal);
} plugin_pwd_qlty;
 
kadm5_ret_t 
plugin_pwd_qlty_check( plhandle handle, kadm5_server_handle_t srv_handle, char *password, int use_policy, kadm5_policy_ent_t pol, krb5_principal principal) 
{
   plugin_pwd_qlty* api = (plugin_pwd_qlty*) handle.api;
   api->pwd_qlty_check(srv_handle, password, use_policy, pol, principal);
}

kadm5_ret_t
plugin_pwd_qlty_init(plhandle, kadm5_server_handle_t)
{ /* do some init */ } 

void
plugin_pwd_qlty_cleanup(plhandle) 
{ /* do some clean-up */ } 

How to construct plugin interface implementation (PII)

Every PII should have only one public create function. For PII called "password quality krb" it would be plhandle plugin_pwd_qlty_krb_create().The following is an example of the this PII:

plhandle plugin_pwd_qlty_krb_create()
{
   plhandle handle;
   plugin_pwd_qlty* api = malloc(sizeof(plugin_pwd_qlty));
   api->version = 1;
   api->pwd_qlty_init          = plugin_pwd_qlty_init;
   api->pwd_qlty_check     = plugin_pwd_qlty_check;
   api->pwd_qlty_cleanup = plugin_pwd_qlty_clean;
   handle.api = api;
   return handle;
}
 
static kadm5_ret_t 
plugin_pwd_qlty_check(kadm5_server_handle_t srv_handle, char *password, int use_policy, kadm5_policy_ent_t pol, krb5_principal principal)
{ /* do some quality verification */ }
 
static  kadm5_ret_t  
plugin_pwd_qlty_init(kadm5_server_handle_t handle)
{ /* do some initialization */ } 
 
static kadm5_ret_t   
plugin_pwd_qlty_cleanup()
{ /* do some cleanup */ } 

For better readability some of the verification, clean-up, error handling code is omitted from the samples

Built-in Plugins

• Examples

  PreAuth, AuthData, Password Quality (see Current plugins section for details)

• Invoking multiple implementations of the same plugin

  This is achieved by using the aimed plugin_id's in plugin_manager_get_service calls. For example, two specific implementations of the password quality plugins may be invoked in password check. Alternatively, one can use all available plugin implementations as it is done for preauthentication.

Dynamic Plugins

• Examples

  Audit, Password sync

• Requirements

1. The difference between dynamic and built-in plugins should be on the level of linkage. Their codebase should be identical.
2. Plugin consumer should not have the knowledge about the type of plugins it is using (in terms of dynamic/built-in). On the caller side the code invoking plugin should stay the same for both dynamic and built-in plugins.
3. Similar to built-in plugins, the plugin consumer may call the multiple implementations of the same plugin interface. For example, two implementations of the audit plugin may be used to handle password change and intruder lockout events.
4. It is responsibility of the administrator to point to the location of the dynamic plugin as part of the configuration.

• Creating dynamic plugin

  The appropriate loader is linked with the set of the desired plugins resulting into the shared library. Details:

1. One of the deliverables of the plugin framework is the loader file. Its responsibility is to load modules that are listed in its local table;
2. The dynamic plugin creator must fill this table with the list of the desired plugins.
3. The dynamic plugin creator then links the loader with the set of the desired plugins resulting into the shared library;
4. Administrator points to the location of the dynamic plugin by setting plugin_loader_path configuration attribute to this library.

The following is the example of the table in the loader:

 static plugin_descr  plugin_dyn_factory_table[] = {
   {"plugin_pwd_qlty_DYN",   plugin_pwd_qlty_DYN_create},
   {"plugin_pwd_qlty_DYN_X",   plugin_pwd_qlty_DYN_X_create},
   {NULL,NULL}
};

• Invoking dynamic plugin

  Similar to builtin plugins with the following additions. The option plugin_loader_path in the configuration file refers to the location of the dynamic plugin shared library and the option plugin_loader_type must be set to dynamic.

Configuration

Configuration file attributes

plugin list - list of the desired plugins;

plugin_api - name of the plugin interface;

plugin_name - concrete plugin implementation;

plugin_id - the numeric id that plugin implementation is associated with. Used by the caller;

plugin_loader_name - name of the loader the particular implementation is associated with;

plugin_loader_type - defines the plugin type: built-in or dynamic;

plugin_loader_path - path to the plugin dynamic library

Example of the plugin section in krb5.conf

[plugins]
       /* built-in plugin */
       plugin_list = PQ1
       PQ1 = {
               plugin_api = plugin_pwd_qlty
               plugin_loader_name = plugin_default_factory
               plugin_loader_type = static
               plugin_name = plugin_pwd_qlty_krb
               plugin_id = 1
       }
      
       /* dynamic plugin */
       plugin_list = PQ_DYN
       PQ_DYN = {
              plugin_api = plugin_pwd_qlty
              plugin_floader_name = plugin_dyn_factory
              plugin_loader_type = dynamic
              plugin_name = plugin_pwd_qlty_DYN
              plugin_loader_path = /path-to-the-lib/libplugin_dynamic.so
              plugin_id = 33
       }

Alternatives

The choice of plugin configuration format is a matter of taste. It may be presented in XML, YAML, JSON etc. One needs only an appropriate parser.

Configuration change at run-time

(...)

Directory Structure

• src/plugin_core

  plugin_manager.[ch], plugin_loader.[ch], impl/plugin_XXX_manager.[ch], impl/plugin_XXX_loader.[ch]

  src/plugins

  pluginA/plugin_A.[ch], pluginA/plugin_A_implN/plugin_A_implN.[ch]

  src/plugin_dynamic

  plugin_dyn_factory.[ch]

Defaults

(...)

Build process

• Options

  DEBUG_PLUGINS - output more info for debugging

Current plugins

We currently have the following plugin frameworks:

• Preauth: All shared objects from profile-specified or installation directory are loaded. Two vtables are read from the shared objects, one for libkrb5 and one for the KDC. The preauth framework iterates over the module list invoking functions to generate or handle preauth data. Preauth vtable functions receive a callback function and data object which allow it to request information such as the expected enctype or FAST armor key for the request.

• Authdata: Very similar to the preauth framework.

• KDB: The profile specifies a database library name for each realm. Shared objects matching the library name are loaded from a profile-specified and installation directory; the first matching object with an appropriately-named vtable data object is used, and the rest are ignored. libkdb5 contains wrappers which invoke functions in the library's vtable, or (for some optional functions) default implementations if the vtable left the function pointer as NULL.

• KDC location: All shared objects from an installation directory are located. A vtable is read from the shared objects. The KDC location framework iterates over each vtable and invokes a lookup function; modules can return success with a location, an error (which halts the location process), or a distinguished error code which passes control along to the next module or the built-in location mechanisms.

• GSSAPI: The file /etc/gss/mechs can specify a list of mechanism OIDs and shared object filenames; filenames are taken as relative to an installation directory. Shared objects implementing mechanisms can export either a function returning a vtable, or can export each GSSAPI interface individually.

The following areas of functionality are virtualized but have no exposed plugin framework:

• Serialization: Serialization table entries can be registered with krb5_register_serializer. Data objects are matched to table entries by magic number. The registration function is exported by libkrb5 and is named with the krb5_ prefix, but it and its associated structure are declared in k5-int.h rather than krb5.h. It is not used outside of libkrb5.

• ccache: Very similar to serialization, except that ccache implementations are selected using a URL-style prefix in the ccache name.

• keytab: Very similar to ccache, except that the keytab registration function is used outside of libkrb5 to register a "KDB keytab", which is used by kadmind to serve GSSRPC without requiring a keytab file containing the kadmin keys.

• Replay cache: Very similar to ccache, except that the replay cache registration function is not used anywhere (even inside libkrb5).

Plugin frameworks which are "not exposed" may still be productively used by vendor forks of the krb5 tree.

Future plugins

The following areas are candidates for future plugin support:

• PRNG
• profile / configuration
• DNS / host-realm mapping
• password quality policy
• lockout
• audit
• password synchronization

Current support infrastructure

In libkrb5support, we have functions to facilitate loading plugins from shared objects. There is a set of functions to load individual plugins from named files and mechglue; these are currently used by the HDB bridge and GSS mechglue:

• krb5int_open_plugin - Create a plugin handle from a filename
• krb5int_close_plugin - Close a plugin handle
• krb5int_get_plugin_data - Retrieve a data object from a plugin handle by symbol name
• krb5int_get_plugin_func - Retrieve a function object from a plugin handle by symbol name

There is another set of functions to scan a list of directories for plugins:

• krb5int_open_plugin_dirs - Create a plugin dir handle from a list of directories and (optionally) filebases
• krb5int_close_plugin_dirs - Close a plugin dir handle
• krb5int_get_plugin_dir_data - Retrieve a list of data objects from a plugin dir handle by symbol name
• krb5int_get_plugin_dir_func - Retrieve a list of function objects from a plugin dir handle by symbol name
• krb5int_free_plugin_dir_data - Free a list of data objects returned by krb5int_get_plugin_dir_data
• krb5int_free_plugin_dir_func - Free a list of function objects returned by krb5int_get_plugin_dir_func

Problem areas

• Every caller of krb5int_open_plugin_dirs specifies either no filebases (e.g. preauth plugins) or a single filebase (KDB plugins). Accepting and processing a list of filebases is probably needless complexity.

• Callers of krb5int_open_plugin_dirs have to know what directories to supply, which means they need to know the krb5 install root as well as the magic plugin area for OS X, and they need logic for reading a profile variable to determine the alternate plugin directory for the test suite (currently only implemented for KDB and preauth plugins).

• In most uses of plugins, we read a data object containing a list of function pointers. This makes it mostly impossible to supply a plugin which works with multiple versions of krb5. If we instead read a function object which we invoked with a version number to retrieve the vtable, it would be possible (though perhaps awkward) to create a shared object which works with multiple versions.

• We are somewhat schizophrenic about how plugins can access krb5 library functionality, and in particular internal symbols. Sometimes we call functions directly, sometimes we make use of a vtable passed into the plugin (e.g. the preauth_get_client_data_proc function), sometimes we use the accessor to invoke internal functions, and sometimes we call APIs or internal functions directly. Ideally we should have a consistent policy with a sound justification.

• When measuring code coverage with gcov, we cannot use shared libraries; this means we need to link in-tree plugins statically into the libraries or programs which load them. We have an ad-hoc method to do this with KDB plugins, but not with other plugin types.

• Administrators have an easier time writing scripts than creating linkable shared objects. In some cases it might yield a better administrator experience to create plugin interfaces via subprocesses than loading shared objects, although in many cases this might not be feasible.

• In some scenarios such as embedded environments, it may be more useful to allow applications to supply plugin vtables via an API (as we do for keytabs and ccaches, though those APIs are not public) than to load them from shared objects in the filesystem.