logo_kerberos.gif

Difference between revisions of "Solaris Build Environment"

From K5Wiki
Jump to: navigation, search
(→‎Install required OpenCSW packages)
 
(60 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
This page contains notes on the setup of a Solaris buildbot worker.
 +
This page contains notes on the setup of a Solaris buildbot worker for MIT krb5. The current buildbot worker is krbdev-sparc-build.mit.edu.
   
 
Our current Solaris build hardware is a Sun Fire V240 running Solaris 10 U10.
  
Our current Solaris build hardware is a Sun Fire V240 running Solaris 10 U10.
   
−
Solaris 10 includes a variety of free software tools in /usr/sfw, but not the full set of dependencies needed to checkout, build, and test the krb5 tree. Our chosen approach to building these additional dependencies is to use the NetBSD pkgsrc collection.
 +
Solaris 10 includes a variety of free software tools in /usr/sfw, but not the full set of dependencies needed to checkout, build, and test the krb5 tree. We have chosen to use [https://opencsw.org/ OpenCSW] to add most of the dependencies, and local builds in /usr/local for the remaining few.
   
−
==Building a newer gcc==
 +
==Set up a useful shell==
   
−
/usr/sfw contains gcc 3.4.3, which is adequate for building most free software but has several problems for building new packages: it defaults to the gnu89 standards environment, which leads to build failures when including C99 Solaris headers such as <stdbool.h>. It also does not understand the -pthread or -print-multiarch options, which some pkgsrc packages rely on. Therefore, we begin by building gcc 5.4 into /usr/local, using the following steps:
  
  +
A root login by default uses a very minimal shell (/bin/sh) with a very minimal path (/usr/sbin:/usr/bin). For any operations performed as root, we begin by starting a functional shell as follows:
   
−
1. Set up a shell with a path containing the needed system utilities:
  
  +
bash
  +
export PATH=/opt/csw/bin:/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
  +
export MANPATH=/opt/csw/share/man:/usr/share/man:/usr/sfw/share/man
   
−
/bin/bash
  
  +
For now, we are not modifying /etc/passwd or root's dotfiles to make this happen automatically.
−
export PATH=/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
  
   
−
2. Create /usr/local/src:
  
  +
==Set up OpenCSW==
   
−
mkdir /usr/local/src
  
  +
Installing the pkgutil command (it will be placed in /opt/csw/bin) and update its catalog as follows:
−
cd /usr/local/src
  
   
−
3. From ftp.gnu.org, fetch the latest versions of gmp, mpfr, and mpc, and fetch gcc 5.4.0. Untar them in /usr/local/src.
  
  +
pkgadd -d http://get.opencsw.org/now
  +
pkgutil -U
   
−
4. Build gmp, mpfr, and mcc as follows. Without "ABI=32" in the configure line, gmp chooses the 64-bit ABI over the default 32-bit ABI for performance reasons.
  
  +
"pkgutil -l" lists installed packages. "pkgutil -a string" looks up string in the catalog. "pkgutil -i packagename" installs a package; the -y flag can be used to skip prompts. "pkgutil -U" followed by "pkgutil -yu" updates all installed packages.
   
−
cd /usr/local/src/gmp-''version''
  
  +
==Install required OpenCSW packages==
−
./configure --disable-shared ABI=32
  
−
gmake && gmake install
  
−
cd /usr/local/src/mpfr-''version''
  
−
./configure --disable-shared LDFLAGS=-L/usr/local/lib
  
−
gmake && gmake install
  
−
cd /usr/local/src/mcc-''version''
  
−
./configure --disable-shared LDFLAGS=-L/usr/local/lib
  
−
gmake && gmake install
  
   
−
5. Build gcc as follows. This build takes many hours.
  
  +
pkgutil -y -i git
  +
pkgutil -y -i libssl_dev
  +
mkdir /opt/csw/sbin/sparcv9 # to work around an apparent bug in openldap package
  +
pkgutil -y -i openldap
  +
pkgutil -y -i openldap_back_bdb
  +
pkgutil -y -i openldap_client
  +
pkgutil -y -i openldap_dev
  +
pkgutil -y -i autoconf
  +
pkgutil -y -i tcl
  +
pkgutil -y -i tcl_dev
  +
pkgutil -y -i expect
  +
pkgutil -y -i bind_utils
  +
pkgutil -y -i bison
  +
pkgutil -y -i python33
  +
pkgutil -y -i buildbot_slave
  +
pkgutil -y -i emacs
  +
pkgutil -y -i gdb
  +
edit /etc/passwd and change the home directory of "games" to /
   
−
cd /usr/local/src/gcc-5.4.0
  
  +
We have decided not to support the Solaris 10 native LDAP library and tools (Solaris 11 ships with OpenLDAP and Solaris 12 will make it the default), so we install OpenLDAP from OpenCSW. OpenSSL 0.9 is present in /usr/sfw/lib, but we need 1.0 or later for PKINIT so we install the OpenCSW version. The bison in /usr/sfw/bin is also too old for our x-deltat.y file. buildbot_slave requires Python 2.7 but does not list it as a formal dependency. emacs and gdb are not needed to build krb5, but are handy to have around for manual testing and debugging work.
−
./configure --with-gmp=/usr/local --with-mpfr=/usr/local --with-mpc=/usr/local
  
  +
−
gmake && gmake install
  
  +
buildbot 0.9 changes its terminology to refer to "workers" rather than "slaves". At the time of this writing, OpenCSW only includes buildbot 0.8.4; when it switches to buildbot 0.9, the package we need will likely change to buildbot_worker.
  +
  +
One of the above packages appears to create a "games" account with the home directory set to /opt/csw. This would ordinarily allow ssh access by the Kerberos principal games@ATHENA.MIT.EDU. We change the home directory of this account to / so that /.k5login governs access.
  +
  +
==Local builds of remaining dependencies==
  +
  +
dejagnu is not present in OpenCSW, so we need to build it ourselves:
  +
  +
mkdir /usr/local /usr/local/src
  +
From https://ftp.gnu.org/gnu/dejagnu/ fetch the latest dejagnu; untar it in /usr/local/src
  +
chown -R root:root /usr/local/src/dejagnu-''version''
  +
cd /usr/local/src/dejagnu-''version''
  +
./configure && gmake install
  +
  +
==Set up buildbot==
  +
  +
Create and switch to the buildbot account:
  +
  +
useradd -d /var/lib/buildbot -u 101 -s /bin/bash -m buildbot
  +
su - buildbot
  +
touch .k5login
  +
edit .profile and add:
  +
PATH=/usr/local/bin:/opt/csw/bin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
  +
MANPATH=/usr/local/share/man:/opt/csw/share/man:/usr/share/man:/usr/sfw/share/man
  +
USER=buildbot
  +
export PATH MANPATH USER
  +
  +
Principals may be added to .k5login, but make sure it exists so that the Kerberos principal "buildbot" does not have access to the account.
  +
  +
Set up ssh for the ssh tunnel to krbdev-buildbot.mit.edu:
  +
  +
mkdir .ssh
  +
ssh-keygen -q -N <nowiki>''</nowiki> -f .ssh/id_rsa -t rsa
  +
cat .ssh/id_rsa.pub
  +
In a separate shell, log into krbdev-buildbot.mit.edu, "su -s /bin/bash - buildbot" and add the contents of id_rsa.pub to .ssh/authorized_keys
  +
Run "/usr/bin/ssh -l buildbot krbdev-buildbot.mit.edu" to add the host key to .ssh/known-hosts. Check the key fingerprint against "ssh-keygen -l -E md5 -f /etc/ssh/ssh_host_rsa_key.pub"
  +
  +
Create the slave directory:
  +
  +
mkdir slaves
  +
buildslave create-slave /var/lib/buildbot/slaves/s01 127.0.0.1:9989 s01 ''password''
  +
  +
where ''password'' should match the entry for s01 in slaves.py on krbdev-buildbot.mit.edu.
  +
  +
As root, create /etc/init.d/buildslave with the contents:
  +
  +
#!/sbin/sh
  +
case "$1" in
  +
start)
  +
su buildbot -c 'ssh -l buildbot -N -L9989:127.0.0.1:9989 krbdev-buildbot.mit.edu &'
  +
su - buildbot -c 'buildslave start --quiet /var/lib/buildbot/slaves/s01'
  +
;;
  +
stop)
  +
su buildbot -c '/opt/csw/bin/buildslave stop --quiet /var/lib/buildbot/slaves/s01'
  +
;;
  +
esac
  +
exit 0
  +
  +
Make it executable with "chmod u+x /etc/init.d/buildslave". Create the following links:
  +
  +
ln -s /etc/init.d/buildslave /etc/rc2.d/S99buildslave
  +
ln -s /etc/init.d/buildslave /etc/rc2.d/K00buildslave
  +
  +
We do not currently stop the ssh tunnel automatically, because it isn't easy to do. The ssh tunnel must be manually restarted if it breaks; on other workers, we use a cron job which runs "ssh -oExitOnForwardFailure=yes ...", but the Solaris 10 ssh does not support that option. The start rule will display an unwanted copy of /etc/motd; an alternative would be to explicitly set the path when running buildbot, instead of relying on buildbot's .profile.
  +
  +
==Create user accounts==
  +
  +
By default, /home on Solaris is controlled by the automounter. To avoid needing to change the automounter configuration, we create user accounts with home directories in /export/home. For example:
  +
  +
useradd -u 3622 -d /export/home/ghudson -s /bin/bash -m ghudson
  +
  +
Creating an account allows the Kerberos principal of the same name in the ATHENA.MIT.EDU realm to log in on that account. Matching the local UID to the Moira UID may be unnecessary as long as we do not make use of remote filesystems on this machine.
  +
  +
To set a reasonable path for development work, the user can edit .profile to add:
  +
  +
PATH=/usr/local/bin:/opt/csw/bin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
  +
MANPATH=/usr/local/share/man:/opt/csw/share/man:/usr/share/man:/usr/sfw/share/man
  +
export PATH MANPATH
  +
  +
The following shell function, or a variant of it, may be useful for configuring a build with the correct paths. This variant is designed to work in a separate build directory placed next to the src directory within a checkout.
  +
  +
k5configure() { ../src/configure --enable-maintainer-mode --prefix=$HOME/inst --with-ldap CFLAGS=-g CPPFLAGS="-I/opt/csw/include" LDFLAGS="-L/opt/csw/lib -R/opt/csw/lib" "$@"; }
  +
  +
==To do==
  +
  +
* We should install the SunPro compiler and do automated builds with that compiler as well as gcc.
  +
  +
==Hardware notes==
  +
  +
The 8-pin modular serial connector for console/ALOM takes a shielded UTP cable. (The shielding probably isn't too important except for EMI reasons.) The modular to female DE-9 adapter is wired as a RS-232 DCE so it will plug directly into most USB to DE-9 RS-232 adapters. (The modular to male DB-25 adapter seems to be wired as a DTE and might need a null modem.)

Latest revision as of 11:54, 12 July 2018

This page contains notes on the setup of a Solaris buildbot worker for MIT krb5. The current buildbot worker is krbdev-sparc-build.mit.edu.

Our current Solaris build hardware is a Sun Fire V240 running Solaris 10 U10.

Solaris 10 includes a variety of free software tools in /usr/sfw, but not the full set of dependencies needed to checkout, build, and test the krb5 tree. We have chosen to use OpenCSW to add most of the dependencies, and local builds in /usr/local for the remaining few.

Set up a useful shell

A root login by default uses a very minimal shell (/bin/sh) with a very minimal path (/usr/sbin:/usr/bin). For any operations performed as root, we begin by starting a functional shell as follows: 

   bash
   export PATH=/opt/csw/bin:/usr/sbin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
   export MANPATH=/opt/csw/share/man:/usr/share/man:/usr/sfw/share/man

For now, we are not modifying /etc/passwd or root's dotfiles to make this happen automatically.

Set up OpenCSW

Installing the pkgutil command (it will be placed in /opt/csw/bin) and update its catalog as follows: 

   pkgadd -d http://get.opencsw.org/now
   pkgutil -U

"pkgutil -l" lists installed packages. "pkgutil -a string" looks up string in the catalog. "pkgutil -i packagename" installs a package; the -y flag can be used to skip prompts. "pkgutil -U" followed by "pkgutil -yu" updates all installed packages.

Install required OpenCSW packages

   pkgutil -y -i git
   pkgutil -y -i libssl_dev
   mkdir /opt/csw/sbin/sparcv9  # to work around an apparent bug in openldap package
   pkgutil -y -i openldap
   pkgutil -y -i openldap_back_bdb
   pkgutil -y -i openldap_client
   pkgutil -y -i openldap_dev
   pkgutil -y -i autoconf
   pkgutil -y -i tcl
   pkgutil -y -i tcl_dev
   pkgutil -y -i expect
   pkgutil -y -i bind_utils
   pkgutil -y -i bison
   pkgutil -y -i python33
   pkgutil -y -i buildbot_slave
   pkgutil -y -i emacs
   pkgutil -y -i gdb
   edit /etc/passwd and change the home directory of "games" to /

We have decided not to support the Solaris 10 native LDAP library and tools (Solaris 11 ships with OpenLDAP and Solaris 12 will make it the default), so we install OpenLDAP from OpenCSW. OpenSSL 0.9 is present in /usr/sfw/lib, but we need 1.0 or later for PKINIT so we install the OpenCSW version. The bison in /usr/sfw/bin is also too old for our x-deltat.y file. buildbot_slave requires Python 2.7 but does not list it as a formal dependency. emacs and gdb are not needed to build krb5, but are handy to have around for manual testing and debugging work.

buildbot 0.9 changes its terminology to refer to "workers" rather than "slaves". At the time of this writing, OpenCSW only includes buildbot 0.8.4; when it switches to buildbot 0.9, the package we need will likely change to buildbot_worker.

One of the above packages appears to create a "games" account with the home directory set to /opt/csw. This would ordinarily allow ssh access by the Kerberos principal games@ATHENA.MIT.EDU. We change the home directory of this account to / so that /.k5login governs access.

Local builds of remaining dependencies

dejagnu is not present in OpenCSW, so we need to build it ourselves: 

   mkdir /usr/local /usr/local/src
   From https://ftp.gnu.org/gnu/dejagnu/ fetch the latest dejagnu; untar it in /usr/local/src
   chown -R root:root /usr/local/src/dejagnu-version
   cd /usr/local/src/dejagnu-version
   ./configure && gmake install

Set up buildbot

Create and switch to the buildbot account: 

   useradd -d /var/lib/buildbot -u 101 -s /bin/bash -m buildbot
   su - buildbot
   touch .k5login
   edit .profile and add:
     PATH=/usr/local/bin:/opt/csw/bin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
     MANPATH=/usr/local/share/man:/opt/csw/share/man:/usr/share/man:/usr/sfw/share/man
     USER=buildbot
     export PATH MANPATH USER

Principals may be added to .k5login, but make sure it exists so that the Kerberos principal "buildbot" does not have access to the account.

Set up ssh for the ssh tunnel to krbdev-buildbot.mit.edu: 

   mkdir .ssh
   ssh-keygen -q -N '' -f .ssh/id_rsa -t rsa
   cat .ssh/id_rsa.pub
   In a separate shell, log into krbdev-buildbot.mit.edu, "su -s /bin/bash - buildbot" and add the contents of id_rsa.pub to .ssh/authorized_keys
   Run "/usr/bin/ssh -l buildbot krbdev-buildbot.mit.edu" to add the host key to .ssh/known-hosts.  Check the key fingerprint against "ssh-keygen -l -E md5 -f /etc/ssh/ssh_host_rsa_key.pub"

Create the slave directory: 

   mkdir slaves
   buildslave create-slave /var/lib/buildbot/slaves/s01 127.0.0.1:9989 s01 password

where password should match the entry for s01 in slaves.py on krbdev-buildbot.mit.edu.

As root, create /etc/init.d/buildslave with the contents: 

   #!/sbin/sh
   case "$1" in
   start)
       su buildbot -c 'ssh -l buildbot -N -L9989:127.0.0.1:9989 krbdev-buildbot.mit.edu &'
       su - buildbot -c 'buildslave start --quiet /var/lib/buildbot/slaves/s01'
       ;;
   stop)
       su buildbot -c '/opt/csw/bin/buildslave stop --quiet /var/lib/buildbot/slaves/s01'
       ;;
   esac
   exit 0

Make it executable with "chmod u+x /etc/init.d/buildslave". Create the following links: 

   ln -s /etc/init.d/buildslave /etc/rc2.d/S99buildslave
   ln -s /etc/init.d/buildslave /etc/rc2.d/K00buildslave

We do not currently stop the ssh tunnel automatically, because it isn't easy to do. The ssh tunnel must be manually restarted if it breaks; on other workers, we use a cron job which runs "ssh -oExitOnForwardFailure=yes ...", but the Solaris 10 ssh does not support that option. The start rule will display an unwanted copy of /etc/motd; an alternative would be to explicitly set the path when running buildbot, instead of relying on buildbot's .profile.

Create user accounts

By default, /home on Solaris is controlled by the automounter. To avoid needing to change the automounter configuration, we create user accounts with home directories in /export/home. For example: 

   useradd -u 3622 -d /export/home/ghudson -s /bin/bash -m ghudson

Creating an account allows the Kerberos principal of the same name in the ATHENA.MIT.EDU realm to log in on that account. Matching the local UID to the Moira UID may be unnecessary as long as we do not make use of remote filesystems on this machine.

To set a reasonable path for development work, the user can edit .profile to add: 

   PATH=/usr/local/bin:/opt/csw/bin:/usr/bin:/usr/sfw/bin:/usr/ccs/bin
   MANPATH=/usr/local/share/man:/opt/csw/share/man:/usr/share/man:/usr/sfw/share/man
   export PATH MANPATH

The following shell function, or a variant of it, may be useful for configuring a build with the correct paths. This variant is designed to work in a separate build directory placed next to the src directory within a checkout. 

   k5configure() { ../src/configure --enable-maintainer-mode --prefix=$HOME/inst --with-ldap CFLAGS=-g CPPFLAGS="-I/opt/csw/include" LDFLAGS="-L/opt/csw/lib -R/opt/csw/lib" "$@"; }

To do

  • We should install the SunPro compiler and do automated builds with that compiler as well as gcc.

Hardware notes

The 8-pin modular serial connector for console/ALOM takes a shielded UTP cable. (The shielding probably isn't too important except for EMI reasons.) The modular to female DE-9 adapter is wired as a RS-232 DCE so it will plug directly into most USB to DE-9 RS-232 adapters. (The modular to male DB-25 adapter seems to be wired as a DTE and might need a null modem.)

Retrieved from "https://k5wiki.kerberos.org/wiki?title=Solaris_Build_Environment&oldid=5936"